CleanSpace® Halo is a Powered Air Purifying Respirator (PAPR) system that houses smart technology, designed by biomedical engineers in a revolutionary, compact system. A lightweight compact powered respirator with minimal parts (no cables, hoses or helmets), engineered to deliver the highest protection in healthcare while providing comfort, easy wearing and easy integration into any setting.

INCLUSIONS

1 Filter
1 Head Harness
1 Fitting Seal Check Cap
Charger and adapters

STANDARDS

EN12942

AS/NZS1716: 2012

IP Rating 66

CLASSIFICATIONS: PAPR-P3TM3

FEATURES

AirSensit™ Technology, a smart automated technology that senses the wearer’s breathing to trigger the airflow to ON or OFF.
Provides High Protection: HEPA filters provide 99.97% filtration efficiency for particles 0.3um and larger, including biohazards(APF 50 & 1000).
Compact design and lightweight (350g/1 lb), compatible with standard hospital PPE. No belts, hoses, battery packs or heads tops worn above the shoulders.
Comfortable to wear for extended periods, Don/doff in under 10 seconds.
Personal adjust system that covers a range of faces to deliver high Fit Test results every time.
Easy-to-clean/disinfect and integrates into standard protocols: Medical grade materials can be disinfected with standard hospital agents. Can be cleaned/disinfected on the ward or in centralized reprocessing areas.
Water tolerant with IP rating 66: suitable for use in decontamination showers and can tolerate frequent cleaning.
Longer battery usage: Up to 9 hours of continuous use with rapid charging time in less than two hours, with low battery alarm that provides full protection for every user, every time.
Sturdy, shock-resistant casing ensures durability of the unit.
Altitude compensated filter blocked detection
Easy and accurate flow capability check
NIOSH Approved fully tested and certified: ensures reliable protection.
With CE Mark approved
Available HEPA filters and accessories (sold separately)
Proudly Made in Australia

***Masks sold separately

VISUAL/AUDIBLE ALARMS

Particulate filter end of life
Battery charge level
Low battery warning
Manufacturers minimum design flow: 120L/min

SPECIFICATIONS

Peak airflow: Up to 230 l/min
Weight: 350g
Lithium-ion polymer battery
Operating time: up to 9hours
Battery recharging: less than2hours
Operation: –10°C to +45°C (14°F to +131°F) at <90% relative humidity
Charging temperature range: 0 ̊C to 35 ̊C
Storage: –10°C to +35°C (–4°F to +131°F) at <90% relative humidity
AC Adapter charger: Input 100 –240V, 50 to 60Hz, output 13.5Vdc ±5%, 24W

Suitable Applications for IP Rating 66:

Particles: 6 Protected against all dust —'dust-tight';

Liquids: 6 Protected against Water projected in powerful jets (12.5mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3minutes, Water volume: 100litres per minute, Pressure: 100kPa at distance of 3m).

Suitable Applications:

Healthcare, pharmaceutical production, research, diagnostic laboratories and emergency responders. Suitable for protection against airborne biohazards.